The tires of all vehicle parts are one of the most exposed to damage and, therefore, we must carry out proper maintenance. Also, the maintenance of the wheels directly influences the driving and therefore the safety of the driver and crew. For all this, you need to know all that you should review and consider about how to maintain your tires.
Pressure
It is most important for proper tire maintenance. First find out what the pressure indicated on the tires of your vehicle, both front and rear wheels (it is not the same). This data usually is indicated in the singing of the doors, but if the tire is not original must find out, for example in the website of the tire. The pressure is always measured with the tire cold and should be checked for normal use, about once a month. It will also be necessary to revise after abnormal situations, such as a blow in a rut.
General condition
When checking the tires, you should also check the general condition as found, i.e., with no bruises, cuts, signs of wear … also controls the state of the tires. Also, the wear of the wheels must be even, equal on both wheels (front or rear), because otherwise it will be a symptom of a problem.
Balanced
Take your car to a specialist workshop to balance the tires with the right equipment and carry out the necessary corrections. Balancing helps prevent premature tire wear and eliminates vibration. It also protects the suspension, steering and transmission of the vehicle. You need to perform this action every 6 months to ensure the safety of the vehicle and every time you change or dismount tires.
Alignment
Correct alignment of direction and suspension in good condition also become important in the car’s behavior and safety. A blow against a curb, for example, can affect the alignment and that is why we regularly take the car to a workshop checked for us.
Rotation
The fronts tires are generally spent faster than the rear, so that regular tire rotation is recommended, i.e., change of position so that I wear more evenly. But you must pay attention because only some tires for his type of drawing, allows rotation forward / back and not left / right.